TK6411C CNC Horizontal Milling and Boring Machine

Availability:

Quantity:



Inquire Add to Basket

Model:
TK6411C
Brand:
REFINE
Code:
8459310000

Product Description

Machine Specification

Machine Picture

Product Description

1) X and Z direction using professional manufacturers to produce stainless steel protective cover to protect the guide rail, Y coordinate stainless steel armor type to protect the guide rail, not only to protect the guide rail, but also improve the appearance.

2) The electrical control cabinet adopts sealed dustproof and air conditioner for dehumidification to ensure the long-term stability of the electrical cabinet.

3) The coolant box is placed on the side of the machine bed, and the chip removal device is integrated for the external cooling of the tool and the workpiece. In order to prevent the splashing of the cutting fluid, the coolant recovery device is added around the table.

ITEM		UNIT	TK6411
Worktable Size		mm	1350*1000
Max. Load of worktable		kg	5000
Table T-slot size (number ~ width × spacing)			7～22x125mm
Transverse stroke of table-X		mm	1600
Spindle Box Vertical Travel-Y		mm	1200
Longitudinal stroke of table-Z		mm	1200
Spindle Travel-W		mm	550
Distance from spindle center line to table		mm	0~1200
Min. distance from boring shaft end face to table center		mm	50
Spindle Bore Dia.		mm	φ130
Max. Weight of Tool		kg	25
Spindle Torque		Nm	1200/1500Nm(30min)
Boring shaft inner hole taper			MAS 403(45°) BT50
Boring shaft Speed		r/min	12～1500rpm
Boring shaft speed high and low dividing line		rpm	375
Boring shaft speed regulation series			Stepless
Fast Moving	X、Y、Z	m/min	10
	W	m/min	5
Feed Speed-- X、Y、Z、W		mm/min	5～2000
Positional Accuracy	X、Y、Z	mm	0.030
	W	mm	0.025
Re- Positional Accuracy- X、Y、Z、W		mm	0.020
Ball screw Size (X/Y/Z)		mm	Ф63×10
Ball screw Size (W)		mm	Ф50×10
Total electrical capacity		KVA	50
Machine Size		mm	710066003600
CNC Controller			Fanuc 0I-MF plus
Machine Weight		Kg	About 18000

TK6411C CNC BORING MACHINE

MACHINE PARTS

SPINDLE BOX

The high and low gear of the spindle are pushed by the hydraulic cylinder to give full play to the maximum efficiency of the spindle motor and ensure the large torque output in the low gear, so as to be suitable for heavy cutting.
MACHINE BED

The longitudinal movement of the sliding seat along the bed is the Z-axis. Z axis adopts AC servo motor and imported ball screw through elastic coupling, compact structure, smooth movement.
FOUNDATION PARTS

All the large pieces of machine foundation are cast with high quality gray cast iron and resin sand process. According to the dynamic analysis, it is guaranteed that it has good anti-distortion and anti-bending ability, and has good precision stability.